Skip to content

Lead OMT - Control Room Operator

Reference
EPR005605
Posting Reference
Ind1
Location
Wellsville, OH, USA
Type
Full Time

EthosEnergy is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, disability, genetic information, pregnancy, citizenship, marital status, sex/gender, sexual preference/ orientation, gender identity, age, veteran status, national origin, or any other status protected by law or regulation.


South Field Energy is a 2 Block GE 7HA.02 Combined Cycle with each block in 1 x 1 configuration. The facility produces ~1180MW and achieved commercial operation in the Fall of 2021. The Lead O&M Technician - Operations is responsible for the proper operation and maintenance of the power facility while assigned on shift. Operates, maintains, troubleshoots, and repairs mechanical equipment, electrical equipment and instrumentation. This equipment includes, but is not limited to the gas turbine, steam turbine, generators, heat recovery steam generator, air compressors, water treatment equipment, demineralizers, motors, pumps, diesel generators, and other auxiliary equipment. Strictly adheres to all safety and environmental rules and regulations to protect employees and public safety.

Job Responsibilities

  • Operates and maintains a combined cycle generating facility and all associated auxiliary and support equipment with minimal guidance or assistance. This position requires making operating decisions based on plant procedures, safety and environmental rules, regulations, policies, and procedures, and using good judgment based on operating data.
  • Proficient at operating the plant via a remote distributed control system (DCS). Periodically, equipment may need to be operated locally via PLC panel interfaces.
  • Sets priorities for the day to day work
  • Communicates plant issues and keeps Operations Manager and/or Facility Manager fully informed of unusual conditions, damaged equipment, and current job progress as the job relates to facility operations. This also applies when performing maintenance when either on or off shift
  • Reads meters, gauges, or automatic devices to record data such as temperature of equipment, vibration of equipment, hours of operation, pressure, and fluid levels to verify operating conditions. Visually inspects and listens to equipment at periodic intervals to detect malfunctions or need for repair, adjustment or lubrication.
  • Provides detailed status of plant conditions to fellow LOMT’s at shift turnover.
  • Perform water chemistry analysis on HRSG, auxiliary boiler, and cooling tower systems. Ensure water chemistry is within proper control ranges. Make adjustments to water chemistry, as needed, by controlling chemical feed and/or blowdown rates. Work with OMT’s and water treatment vendor to properly monitor overall chemistry program.
  • Operate demineralized water system in accordance with OEM and plant procedures and monitor demineralized water to ensure quality is within acceptable limits.
  • Fully supports the use of a computerized maintenance management system by demonstrating proficiency in using the system, entering data consistent with fellow employees and dedication to the facility maintenance philosophy. Records equipment discrepancies in detail on work requests and documents maintenance actions taken on work order forms. Handles corrective maintenance and preventive maintenance work orders in a timely and high quality manner. Shows diligence in documenting spare parts usage and re-ordering.
  • Maintains equipment by tightening fittings, replacing valve packing, gaskets, valves, gauges, etc. and cleaning, replacing, oiling and lubricating other component parts and equipment as required.
  • Opens and closes valves as required for proper system operation and mechanical isolation. Opens and closes circuit breakers as required for proper system operation and electrical isolation.
  • Performs capital project and/or major program responsibilities as assigned by the Operations Manager.
  • Sets up and operates various tools and instruments to repair parts and equipment. Operates welding and cutting equipment and completes metal fabrication projects.
  • Diagnoses cause of mechanical malfunction or failure of operational equipment.
  • Uses fluke meter and other test equipment to calibrate and repair plant instrumentation and electrical circuits.
  • Assist in troubleshooting and inspecting programmable logic controllers, distributive control systems including control card replacement and wiring terminations.
  • Assist OMT-I&E and OMT-Mechanical Technicians in repairing plant instrumentation and plant equipment.
  • Identify and resolve CEMS problems. Assist in performing calibrations and gas bottle change outs.
  • Perform general housekeeping and continuous improvement of the appearance of the facility including painting projects as required. Maintain the cleanliness of all areas of the plant and control room, or other duties as assigned.
  • Ensure all accidents/incidents/near misses/hazards are immediately reported to Facility Management and relevant paperwork is completed within 24 hours of occurrence.
  • Work within the team to develop a culture where everyone embraces, upholds and accepts responsibility for a safe workplace, a healthy working life, a sustainable environment and the right and duty to intervene.
  • To demonstrate commitment to continual improvement of HSE performance, and to be responsible and accountable for the HSE performance of their teams.

Required Skills / Knowledge

  • Mechanical, instrumentation and electrical equipment knowledge is required.
  • Demonstrates knowledge of all facets of power plant operations
  • Demonstrates the ability to make competent decisions in emergency situations.
  • Demonstrates knowledge of all facets of gas turbine power plant maintenance.
  • Knowledge of GE 7HA.02 heavy frame, advanced technology gas turbines.
  • Experience with GE Mark VIe DCS is a plus.
  • Above average computer proficiency with Microsoft Office software.
  • Above average verbal and written communications skills.
  • Ability to operate a fork-lift and similar plant equipment.

Experience

  • Minimum of five (5) years of directly related operations or maintenance experience in an electrical generating facility as a qualified CRO. Combined cycle commissioning, operations and maintenance experience is highly desired.
  • Strong leadership, technical and administrative skills required.
  • Ohio Stationary Engineer License, or ability to attain within 6 months of hire.
  • Prior lead or supervisory experience is a plus, but not required.
  • GE Frame 7FA or 7HA gas turbine with multi-shaft experience is desired.

Education Requirements

  • High School diploma or equivalent required.
  • Associates Degree (AA) or equivalent from a two-year college or technical school is preferred. Education in power generation, mechanical maintenance, electrical maintenance or instrument and controls is a plus.

Physical Requirements

  • Ability to do walking, reaching, climbing, and stooping and lifting (up to 50 pounds).
  • Ability to enter confined spaces and work at heights.
  • Work shift hours, overtime, and irregular hours as needed to support reliable operation of the facility.

Apply today

To apply for this vacancy please click the button below and submit your details. We thank you for your application and interest, and we look forward to hearing from you!

Apply for this job

Is this your preferred language?

It looks like you are visiting us from United States of America. Would you like to switch to the Polish language version of EthosEnergy?